久久天天躁夜夜躁狠狠

  • <span id="0x550"><video id="0x550"><b id="0x550"></b></video></span>

  • <optgroup id="0x550"><small id="0x550"><source id="0x550"></source></small></optgroup>

          <acronym id="0x550"></acronym>

          歡迎來到東莞市精虹翔自動化機械設備有限公司!

          服務熱線

          13713014068

          雙頭空壓式點焊機
          Loading...

          咨詢熱線

          0769-83218951

          戴先生 :13802381027

          彭小姐 :13925780098

          客服QQ :1004618863

          傳真:0769-81191858

          郵箱:1004618863@qq.com

          地址:中國廣東省東莞市寮步鎮上底工業區上中路

          空壓式點焊機    Air-Pressure Spot Welding machine

          龍門式多點焊機:L-type Multi-point spot welder

           

          主要用于低碳鋼、不銹鋼及部分有色金屬的焊接,并可實現板與板,板與凸焊螺母、螺柱的凸焊焊接。是汽車、家電制造、金屬箱柜等領域散件焊接

          1. 直接式加壓機構,隨動性能好,焊接速度快

          電磁閥采用日本黑田的,反應快,質量好,且電磁氣閥與氣缸直接連接,加快動作反應速度,可減少空氣流動的損耗。

          2. 使用壽命長、噪音小

          機身加強牢固鋼結構,具有抗沖擊、抗振動,實現穩定焊接,機加工精細,緊湊,氣缸運行順暢,提高使用壽命,減小噪音.

          3. 安全、使用方便

          高性能氣路系統過濾杯設有護罩,可防止杯子破損時的碎片飛濺,亦可保護從外部所受碰撞的沖擊。杯子和護罩可裝卸,檢修容易。

          4. 采用節水型強制冷卻方式

          采用循環式冷卻水,避免水的浪費,大幅度減少冷卻水量。延長工作時間.

          5. 上部絕緣簡單實用

          二次導體采用上部絕緣方式,可避免鐵屑的附著或下座安裝焊接工裝時易產生的絕緣部位的短路事故。

          6. 主回路采用大功率SCR無觸點開關  

          主回路采用水冷大功率可控硅元件,輸出電源強勁、穩定,可靠,使用壽命長,

          7. 高導電性、電力損耗低 ,高溫自動保護.

          二次電流回路中,主變壓器上次級輸出采用多層高韌性、高導電性紫銅軟帶,并呈V型連接;大幅提高使用壽命,下次級輸出采用一體式直接連接機構,電力損耗降至最低。

          主變壓器裝有溫控系統,循環水溫度過高,機器會自動斷電,溫度正常了,又會自動通電,

          保護機器過熱,提高使用壽命.

           

          Performance characteristic

           Air-Pressure Spot Welding machine

          Performance characteristic

          1.direct-compression machineStructure, with good dynamic performance, welding speed is quick.

          uses Japanese KURODA, quality good, responds quickly.Electromagnetic valve cylinder with a direct connection to speed up moves reaction speed, the RBI increased the speed and reduce the air flow loss。

          2. Long service life, noise

          Fuselage strengthens reliable steel structure, has anti-impact, anti-vibration, realizes stable welding,  machining is fine, compact, air cylinder movement is smooth, enhances service life, reduces the noise.

          3. security、

          Easy to use high-performance air filtration system Cup road with shielding to prevent broken glass when the debris flying,Protection also suffered from the impact of external shocks. Cup and shielding can be handling, maintenance easy。

          4. Mandatory use of water-cooling method

          the use of cooling water, to avoid the waste of water,Significantly reduce the cooling water.

          5. high solid strength of body structure

          with shock and vibration of the rigid,Pressure to prevent the sliding head electrode, stability Welding。

          6.Upper insulation is simple and practical

          by the upper secondary conductor insulation, can avoid the attachment or iron filings Xiazuo Welding Equipment, easy to install the insulationThe short-circuit accident site.

          7. main circuit using high-power SCR non-contact switch  

          Main circuit using high-power water-cooled SCR components, the power output strong, stable,reliable, the life is long

          8. high conductivity, low power loss,high temperature automatic protection.

          secondary current loop, the last main transformer output by multi-storey high-level toughness, High-conductivity copper soft zone, and a V-shaped connection; substantial increase in life, the next-level output by one-connected directly to institutions, to minimize the power loss。

          The main transformer has the temperature control system,When circulating water hyperpyrexia, machine automatic power failure,When the temperature is normal, will put through the power automatically,protects the machine overheated, enhances service life.

           

          單位

          機型
          額定
          容量
          rated capacity
          額定
          電壓
          rated voltage
          額定
          頻率
          rated frequency
          最大短路電流
          maximum short circuit current
          負載
          持續率
          cyclic duration factor
          臂伸
          尺寸
          Arm length
          最大加壓力
          Maximum pressure
          電極
          行程
          Electrode stroke
          冷卻
          水量
          cooling
          Water
          重量
          weight
          焊接能力(二塊疊焊)
          低碳鋼
          Low carbon steel
          鍍鋅板
          galvanized sheet
          KVA V HZ A % mm N mm L/min KG mm mm
          60 60 380 50/60 23000 10 600 6100 50 10 300 3+3 2.5+2.5
          D(T)N-80 80 380 50/60 25000 10 600 6100 50 12 350 3.5+3.5 3+3
          D(T)N-100 100 380 50/60 27000 10 600 6100 50 12 380 3.8+3.8 3.3+3.3
          D(T)N-150 150 380 50/60 29000 10 600 10000 50 12 430 4.5+4.5 3.8+3.8
          D(T)N-200 200 380 50/60 32000 10 600 10000 50 12 510 5+5 4+4

          版權所有©2011-2017 東莞精虹翔保留一切權利解釋

          公司總部:中國廣東省東莞市寮步鎮上底工業區上中路

          聯系電話:13713014068 傳真:0769-81191858

          備案號:粵ICP備0000000號-1 

                企業郵箱   技術支持:企創信息

          久久天天躁夜夜躁狠狠
        1. <span id="0x550"><video id="0x550"><b id="0x550"></b></video></span>

        2. <optgroup id="0x550"><small id="0x550"><source id="0x550"></source></small></optgroup>

                <acronym id="0x550"></acronym>